H2S Gas Detector XAR-HP
H2S Gas Detector XAR-HP
H2S Gas Detector XAR-HP
Features
Portable H2S gas detector
H2S gas detector range: 0 ~ 500 PPM. Resolution: 1.0 PPM
Using high precision 3-electrodes electrochemical H2S sensor
Support auto zero and span calibration
One press to restore factory setting, free from the bother of mis-operation
Audible alarm
Two set points of instantaneous alarm
Trend chart display showing the past readings for H2S
With temperature and humidity measurement
Only two buttons and easy to operate
Sensor is placed at the front end of gooseneck for quick measurement
Four AA alkaline batteries
Theory of operation
The Santacary XAR-HP H2S Gas Detector uses 3-electrode electrochemical technology, operating by the diffusion principle, for determining the concentration of H2S in air samples. In diffusion mode, the atmosphere reaches the sensor in the front end of gooseneck by diffusing. Normal air movements are enough to carry the sample to the sensor.
Device
1. Sensor at the front end of gooseneck
2. Liquid crystal display (LCD)
3. Power button
4. Function button
5. Battery compartment cover
Alarm
Low Alarm and High Alarm
XAR-HP has two alarm set points: High Alarm (H2S: 15 PPM) and Low Alarm (H2S: 10 PPM).These set points are factory set and cannot be changed. XAR-HP is equipped with audio alarms to alert you when the ambient gas concentration exceeds one of the two alarm set points. When H2S value exceeds the defined high alarm set point (15 PPM), the audio alarm will sound at 6 beeps/sec. When H2S value exceeds the defined low alarm set point (10 PPM) but less than the defined high alarm set point (15 PPM), the audio alarm will sound at 4 beeps/sec.
Factory Alarm Set points
Gas | Low | High |
H2S | 10 PPM | 15 PPM |
Specifications
H2S Sensor Specification:
Measurement Range | 0 ~500 PPM |
Resolution | 1.0 PPM |
Repeatability | <±5% of signal |
Sample Method | Diffusion |
Temperature Range | -20 to 40°C (-4°F ~ 104°F) |
Humidity Range | 15 to 90%RH |
Response Time | <15 seconds |
Temperature Specification
Temperature Range | -10.0~60.0°C (14~140°F) display |
Display Resolution | 0.1°C (0.1°F) |
Display Options | °C/°F switchable |
Accuracy | ±0.5°C (±0.9°F) |
Response Time | 5~30 seconds (device must equilibrate with environment) |
RH Specification
Measurement Range | 0.0~99.9%RH |
Display Resolution | 1%RH |
Accuracy | ±4.5%RH |
Response Time | <8 seconds for 63% of step change |
General Specification
Operating | -10°C to40°C (14°F to 104°F),15~90% RH non-condensing |
Storage | -10°C to 60°C (14°F to 140°F),<99% RH non-condensing |
Power Supply | Four AA Alkaline Batteries |
Dimensions | 75x400x25mm (2.95x15.35x0.98”) |
Weight | 155 grams (5.47 oz.) without batteries |