iU2-C UVC Light Meter
iU2-C is a precise meter that measures ultraviolet UVC radiation.
UVC wavelength is 200-275 nm, also known as short wave sterilization ultraviolet. Peak wavelength of the curve between it and bactericidal efficiency (265 nm) is very close, so when 253.7 nm radiation reaches a certain value, it can be used to treat intestinal bacteria, aspergillus flavus and HBsAg (hepatitis B surface antigen) and other pathogens were killed in a short time. Ultraviolet germicidal lamp emits UVC short wave ultraviolet.
Features
Gallium Nitride Based Material Photovoltaic Mode
High-precision detection, rapid response and operation
Good Visible Blindness
Only one power button and easy to operate
Two AAA Alkaline Batteries
Application
Monitoring UVC Germicidal Lamp Intensity & Aging
Monitoring Water Treatment Disinfection Lamp Intensity & Aging
Testing Eyewear UVC Blocking Capabilities
Measuring Germicidal Lamp Fixture Leakage
Testing UVC Intensity in Semiconductor Fabrication, Offset Printing, Environmental Monitoring and Industrial Process Control.
Device
1. LCD display
2. Power button
3. UVC sensor
Operation
When the device is turned off, press Power button to turn on the unit. Press Power button again to turn off the unit. When the unit is first turned on, it performs 5 seconds countdown for device warm up, then enters normal display. The device updates readings every 2 seconds. The UVC radiation intensity unit is µW /cm2.
Spectral Response
Specifications
UVC Specification
UVC Measurement Range | 0 to 3000 µW/cm2 |
Spectral Detection Range | 220 to 280 nm |
Peak point of Spectrum | 265 nm |
Measurement accuracy | ±4% or ±1 digits |
Resolution | 1.0 µW/cm2 |
Temperature Range | -10 to 50°C (14 to 122°F) |
Humidity Range | 0 to 90%RH |
General
Operating | -10°C to 50°C (14°F to 122°F), 0~90% RH non-condensing |
Storage | -10°C to 60°C( 14°F to 140°F), <99% RH non-condensing |
Power Supply | Two AAA Alkaline Batteries |
Dimensions | 67x124x25 mm (2.64x4.88x0.98”) |
Weight | 123 grams (4.34 oz.) with batteries |
Calibration Report